Home > Finetrax Track System > 00 Gauge >

Finetrax 00 Gauge 1in7 Single Slip Kit Code 75 Bullhead
Finetrax 00 Gauge 1in7 Single Slip Kit Code 75 Bullhead

Alternative Views:

Our Price: £39.00

Availability:: Usually Ships in 1 to 2 Days

Description Download Instructions & Printable Template Package Contents
PLEASE NOTE!!! This Easy Build kit has gone through a design change!

This easy build Single Slip kit has gone through a design change to use 'All Rail' instead of a casting for the crossing frog. As such, a 'cast crossing frog' is not longer provided and has now been replaced with pre-machined V's that simply slide into the base. This results in far better looking track and smooth running of trains.

Updated assembly instructions can be found here:

Another change is that the switch blades are now soldered 'in situ' by the kit builder. They still come pre machined, however.

More info on this design change can be found here:


Kit to build a 00 Gauge 1in7 Single Slip with code 75 Bullhead Rail.

Our new 'Easy Build' range - Just cut rail to length and slide through the chairs!!!

The turnout base in this kit comes with all chairs pre fitted as one solid piece. Also, the kit comes supplied with pre machined switch blades and Tie Bars with pre machined holes for the pins.

Important Information:
PLEASE NOTE: Other items are required to complete! You will need:
• A 25w-40w Soldering Iron with 2mm Chisel Tip
1mm Rosin Core Lead Free Solder
Suitable wire for power feeds
• Super Glue
Sharp File for cleaning up rail ends
Xuron type Track Cutters

NOTE: This is a kit that must be assembled and NOT a finished 'ready to lay' Single Slip. Other items and tools are needed to complete (see above).

This kit is designed to 00 Gauge 'DOGA Intermediate' standards, using 1.2mm flangeways.