PLEASE NOTE!!! This Easy Build kit has gone through a design change and upgrade!
This easy build turnout kit has gone through a design change and now includes a new plastic sleeper base with all the chairs already pre installed! No sprues or individual chairs that need cutting off and inserting into the base one by one - a massive time saver!
This kit also now uses 'All Rail' instead of a casting for the crossing frog. As such, a 'cast crossing frog' is not longer provided and has now been replaced with pre-machined V's that simply slide into the base. This results is far better looking track and smooth running of trains.
Another change is that the switch blades are now soldered 'in situ' by the kit builder. They still come pre machined, however.
More info on this design change can be found here:
https://www.rmweb.co.uk/community/index.php?/topic...
Kit to build an N Gauge '3 Way' Tandem turnout with code 40 Bullhead Rail.
Important Information:
PLEASE NOTE: Other items are required to complete! You will need:
• A 25w-40w Soldering Iron with 2mm Chisel Tip
•
Suitable wire for power feeds
• Super Glue
•
Sharp File for cleaning up rail ends
• Xuron type Track Cutters
NOTE: This is a kit that must be assembled and NOT a finished 'ready to lay' turnout. Other components are needed to complete (see above).
Only models with finer wheels and flanges (models released since 2000) will run on this fine code 40 track system. It is designed to accept stock with a back to back of 7.4mm.
Older rolling stock may need wheels replacing with newer, finer equivalents.
