The crossing frogs and central 'K' Crossings comes as 4x pre-made castings that simply locate into holes on the base - all the hard work is done for you!
PLEASE NOTE: Other items are required to complete! You will need:
• A 25w Soldering Iron with 2mm Chisel Tip
for filing switch blades and cleaning up rail ends
NOTE: This is a kit that must be assembled and NOT a finished 'ready to lay' turnout. Other components are needed to complete (see above).A Switch Blade Filing & Soldering Jig (link above) is needed to filing the switch blades and solder the switch blade to the chair plate.An additional 'Chair Plate Soldering Jig' is also needed in order to solder the smaller chair plates for the 4x 'inner' switch blades.Only recently released models with finer wheels and flanges (models released in the last 10 years) will run on this fine code 40 track system. It is designed to accept stock with a back to back of 7.4mm.
Older rolling stock may need wheels replacing with newer, finer equivalents.