: Other items are required to complete! You will need:• A 25w-40w Soldering Iron with 2mm Chisel Tip
Suitable wire for power feeds
• Super Glue
for cleaning up rail ends
• Xuron type Track Cutters
NOTE: This is a kit that must be assembled and NOT a finished 'ready to lay' turnout. Other components are needed to complete (see above).
Only models with finer wheels and flanges (models released since 2000) will run on this fine code 40 track system. It is designed to accept stock with a back to back of 7.4mm.
Older rolling stock may need wheels replacing with newer, finer equivalents.